Sennheiser NET 1 Betriebsanweisung

Wireless Systems Manager (WSM)NET 1Instructions for use

8Channel MenuApplications MenuHelp MenuProperties... Retrieves the device window for the selected receiver.Delete Deletes marked panels from the disp

9Configuring devicesUpdating the firmware in the connected devicesNote:y Only the firmware is updated; the device settings remain the same.y The firmw

10Transmitting the firmware to the receiversTo transmit the firmware to the receivers:왘 Click on “OK”. The firmware is transmitted to the receivers. O

11Updating the firmware in the NET 1The NET 1 is delivered with the most current firmware. You can transmitfuture firmware to the NET 1 by following t

12“Easy Setup” frequency managementUsing the “Easy Setup” frequency management capability, you can:y Distribute frequencies in the channel bank to dev

13Show connected receiversThe “Easy Setup” window displays all receivers connected to the NET 1with their frequency range and the ports on the NET 1 o

14Allocating the identified frequencies to the receiversAfter the frequency preset scan has been performed, the number ofunused frequencies identified

15Specifying frequencies for an “evolution wireless G2” series receiver without a scanNote:When you allocate frequencies without a frequency preset sc

16Configuring individual receiversYou can also configure individual receivers. Note:To change the parameters in a receiver, “Remote Access” must beact

17Changing parameters in a receiverBefore you change parameters:“Remote Active” or “Remote Inactive” is displayed at the bottom of thewindow. You can

18Setting “evolution wireless G2” series receivers to a new, predefinedfrequencyTo set the receiver to a predefined frequency:왘 Click on “Bank” and co

19Setting EM 3532 dual receivers to a new, predefined frequencyTo set the receiver to a predefined frequency:왘 Click on “Frequency Table” and confirm

20Working with panelsThe panel viewEvery panel displays a receiver that is connected to the NET 1. Layout of the panelName of the deviceThe name of th

21Working with panelsTo work with the panels:왘 Select the panel you wish to work with.왘 Click on the panel using the right mouse button.A contextual m

22Change the panel viewThe “WSM” offers three different styles for the panels.왘 Make your selection in the “View Style” contextual menu.An additional

23Monitoring devicesObserving and evaluating the field strength displayObserving the field strength and recognizing deviationsThe current values of th

24Saving messagesYou can save the retrieved messages as a “*.log” file using the followingprocedure:왘 Click on “File” > “Save Message Log...” in th

25If problems occurHardwareFirst check the connections and the cables for the devices (see NET 1 userguide).SoftwareIn the future, the Sennheiser home

26GlossaryDeviation Modulation associated with the receiver; Represented as a bar diagram (Dev)Easy Setup Function for allocating frequenciesFirmware

1ContentsImportant information regarding this manual ... 2For your safety ...

Sennheiser electronic GmbH & Co. KG30900 Wedemark, GermanyPhone +49 (5130) 600 0Fax +49 (5130) 600 300www.sennheiser.comPrinted in Germany Publ.

2Important information regarding this manualThis manual describes the “Wireless Systems Manager” (WSM) PCsoftware for the NET 1 system. Information on

3Capabilities of the “WSM”The “Wireless Systems Manager” (WSM) permits real-time monitoring aswell as remote control of all relevant receiver paramete

4Putting the system into operationConnecting the NET 1 to a PCHow to connect the NET 1 to a PC is shown in the user guide for the NET 1.Installing the

5Learning the operator interface of “WSM”Main windowThe main window contains the following regions:쐃 Menu bar쐇 Symbol bar쐋 Display area쐏 Status barMen

6Display areaWith the standard settings, the display is divided in two. The panels for theconnected receivers are displayed on the left; this region i

7Overview of menusFile MenuView MenuSystem MenuOpen Configuration... Opens a saved configuration.Save Configuration Saves the current configuration un